Mickey Mouse Pumpkin Decoration

Is it so simple to make a DIY Mickey Mouse Pumpkin decoration! This is a no carve pumpkin project that is kid friendly and can be up-cycled year after year. 

I was visiting Disney Springs for dinner at Splitsville Orlando and I was loving all the subtle nods to Mickey in the decorations.  I stopped and took a photo of a Mickey Mouse Pumpkin planter because it was too cute not to recreate. My friend Bert Anderson said that if I would craft it, she would make it. But it HAD to be easy.  I assured her it would be super simple that even the non-crafty crafter could make one for their home.

What supplies do you need to make a Mickey Mouse Pumpkin?

• 2 small no carve, styrofoam pumpkins
• 1 large pumpkin. (real or fake)
• 1 can of spray paint
• 4 bamboo skewers

What tools and materials are needed to make a Mickey Mouse pumpkin?

• Metal sekwer
• Cardboard or paper to cover the work surface
• White vinegar and paper towel

Should I use fresh or fake pumpkins for this project?

For this Mickey Pumpkin project I am using both fresh and fake pumpkins. The face is a fresh pumpkin and the ears are fake pumpkins. It is IMPORTANT that the ears be fake because they are much lighter than a fresh pumpkin of the same size. You want to ear pumpkins to be light so they don’t break off of the bamboo skewers that will hold them in place.

Can I use a fake pumpkin for the face?

Yes! Feel free to use a fake pumpkin for the face. You will be able to use the decoration year after year. I wasn’t able to find a fake pumpkin of the size I wanted at the price I wanted and opted for a real pumpkin.

Prepare the pumpkin for painting.

If you are using a fresh pumpkin for the head of the Mickey, chances are that the pumpkin has been sprayed with some sort of wax or protectant to help preserve the freshness of the pumpkin. Use a paper towel and wipe down the pumpkin with vinegar and hot water. I splash a bit of vinegar on the towel and do my best to break the coating on the pumpkin. Rinse with hot water to further remove the wax coating and rinse off the vinegar. My removing the coating on the pumpkin, the spray paint will adhere to the surface better.

How to make a Mickey Mouse Pumpkin Decoration:

1. Wash the outside of the real pumpkin.
2. Use a metal skewer to poke 2 holes.
3. Slide bamboo skewers into the holes.
4. Use the same metal skewer to poke holes in the smaller pumpkins.
5. Spray the pumpkins with the spray paint. 
6. Flip dried pumpkins over and spray all surfaces.
7. Repeat with a second light coat. Allow to dry completely.
8. Assemble to Mickey Mouse pumpkin by sliding the smaller pumpkins into place over the bamboo skewers.
9. Display for all to enjoy.

I would love to see someone make this Mickey Mouse pumpkin teal as part of their Teal Pumpkin Project decorations. 

Pin to Pinterest:

Continue to Content

Yield: 1

Mickey Mouse Pumpkin Decoration

Print

Is it beyond simple to make a DIY Mickey Mouse Pumpkin decoration! This is a no carve pumpkin project that is kid friendly and can be up-cycled year after year. 

Prep Time 5 minutes

Active Time 10 minutes

Additional Time 30 minutes

Total Time 45 minutes

Difficulty beginner

Materials

• 6" Styrofoam pumpkin 
• Large pumpkin
• Spray Paint, choice of color 
• Bamboo skewers

Tools

• Metal skewer 
• White vinegar
• Paper towel

Instructions

1. Wash the outside of the real pumpkin with water and vinegar to remove any wax coating.
2. Use a metal skewer to poke 2 holes, close in proximity to each other in the large pumpkin where the ears will be.
3. Slide bamboo skewers into the holes and make a mark on the smaller no carve pumpkins where the skewers would be inserted into the bast of the pumpkins.
4. Use the same metal skewer to poke holes in the smaller pumpkins, matching where the bamboo skewers made marks. 
5. On a protected surface with cardboard or paper, in a well ventilated area, preferably outside, spray the pumpkins with the spray paint. 
6. Use a light sweeping motion and small strokes, on each side of the pumpkin, overlapping as you go. 
7. Only spray one coat and allow to dry completely.
8. Flip dried pumpkins over and spray all surfaces.
9. Repeat with a second light coat.
10. Allow to dry completely.
11. Assemble to Mickey Mouse pumpkin by sliding the smaller pumpkins into place over the bamboo skewers.
12. Display for all to enjoy.

Recommended Products

As an Amazon Associate and member of other affiliate programs, Savoring The Good, LLC may earn from qualifying purchases.

• 
  Krylon®: Metallic
• 
  Carveable Polyfoam Pumpkin (Pack of 2)

Did you make this project?

Please leave a comment on the blog or share a photo on Pinterest